Potassium Methylsiliconate Cas 31795-24-1

Appearance: Transparent or light yellow transparent liquid
Solid content: 40±2%, 50±2%
Packing: 250kg/plastic drum or IBC drum
Sample: Available
related documents:

COA of Potassium methylsiliconate 40% Cas 31795-24-1
COA of Potassium methylsiliconate 50% Cas 31795-24-1
TDS of Potassium methylsiliconate 50% Cas 31795-24-1
TDS of Potassium methylsiliconate 40% Cas 31795-24-1
MSDS of Potassium methylsiliconate Cas 31795-24-1

Request for product documents

Description

Potassium methylsiliconate
Potassium methylsiliconate Quick Details
Chemical Name: Potassium methylsiliconate; potassium methylsilanetriolate
CAS No.: 31795-24-1
Chemical Structure:
Appearance: Transparent or light yellow transparent liquid
Solid content: 40±2%, 50±2%
Potassium methylsiliconate Typical Properties

Item
Specifications

Appearance
Transparent or light yellow transparent liquid

Solid content
40±2%, 50±2%

Density
1.2-1.4g/cm³

Potassium methylsiliconate Usage
1.Low-fired clay products immediately after they have been made: e. g. roof tiles, facing bricks, floor tiles, flower pots.
2.Aerated concrete.
3.Gypsum and gypsum-based fiber boards.
4.Lightfillers, such as perlite, vermiculiteandaerated concrete granules.
5.Insulating materials.
6. As a surfacetreatmentSilway 714 is diluted to a concentration of 3 percent solids or less prior to application.
7. Do not use concentrations higher than 3 percent solids unless prior testing indicates a necessity. The use of higher concentrations than required may result in the formation of a white residue on the surface. Users should test the concentration to be applied on the substrate prior to use.3. After application of the silicone solution, allow the treated surface to dry for at least 24 hours to develop maximum water repellency. This interval may be shortened somewhat by force-drying at temperatures up to 175°C. While this removes the water quickly, time must be allowed for the curing reaction between Silway 714 and the surface being treated. Carbon dioxide streams do not appear to reduce the cure time appreciably.
8.This product is used in rubber, plastic, fiberglass, paint, adhesive, sealant and other products.
Potassium methylsiliconate Packaging and Shipping
Packing: 250kg/plastic drum or IBC drum
Delivery: UN 3267
Potassium methylsiliconate Storage
Sealed storage under 5-30℃ temperature. Avoid high temperature, freezing conditions and contacting with acidic substances. The storage period is 12 months. If the expiration date is exceeded, it can still be used if the analysis is qualified.
This product is a strong alkaline substance, pay attention to safety when using and storing.

Reviews

There are no reviews yet.

Be the first to review “Potassium Methylsiliconate Cas 31795-24-1”

Your email address will not be published.

Scroll to Top

Request A Free Quote

Questions, comments? You tell us. We listen.
Free samples are available for you.